Measure twice…

Well last week we finally started timber framing. It has been lovely to see Mike again. We build 2 passive houses with his company McCartney’s & Co near Padstow a few years ago which were stunning. This job involved a lot more in-situ planning as the frame is having to join onto the existing house and rafters. I am please to say Mike’s calm and pragmatic approach is a pleasure to work with as always and the frame flew up, with the NBT system going on next week.

Here are a few pics to wet the appetites.

   

Roof lights

We have just chosen our conservation rooflights and are really excited to say we have secured a deal with The Roof Light Company and are working with their technical team to get a truly flush fit with a warm slate roof by using custom made flashing in code4.

 

This image shows the roof lights we are going for but we will be dropping them down another 25mm to get a truly flush fit. We loved the way these roof lights look, being both minimal and sympathetic to the original concept.

We will be fitting them in due course so we will post a review of how that goes, and the joys of playing with lead to achieve the flush fit later in the year.

Thanks to the Roof Light Company for being as excited about our project as we are.

UK Oak Doors

Well we finally got things sorted on the oak door front. I am pleased to say that UK Oak Doors replaced the dodgy door with a glazed version for another room and included some Treatex Hardwax oil for our inconvenience.

So how do we like the doors. We everyone comments on them. Whilst the oak isn’t the most characterful and the grain is a little looser than we would like the build quality and detailing is excellent, particularly the diamond oak screw plugs.

In terms of value for money and construction they are hard to beat. Realistically the only way we could have got a better door would have been by spending a lot more money or making them ourselves from handpicked European Oak.  In terms of pricing, bulk and trade discounts were not available which does make it difficult for resellers/builders but the prices are competitive and i think geared primarily to the consumer. The best bet seemed to be to keep an eye on the website and take advantage of whatever monthly promotions were available.

The important thing is choosing the right door. For open out doors choose the Oak 3 ledge Barn Door as the hinges can go on the un-ledged bead & butt face, and this looks the best. If the hinges are going on the inside on the ledges then you need to order the Oak  Ledge with Optional brace door as the ledges go all the way to the edge of the door and the hinges look “right” that way, (which they don’t on the cottage Door).

The value latch sets are pretty but they aren’t waxed so be prepared for a little bit of wirewool and wax to finish them off and make them more tactile. Again its a value for money product and with a little finishing you can add the extra “je ne sais quoi”.

There is a lot more i could write but it’s late so i think to sum up when i consider all the factors we would happily use UK Oak Doors again. Thanks to Vicky for her efforts in resolving all the issues that arose.

   

Stoned…

We took advantage of the fine dry weather this week and started the landscaping… lots of curved short stone walls are coming in to terrace the levels… and we have been really fortunate to find great stone every time Dave does a little excavation with his digger…

Variable Oak

We are currently discussing the quality of oak with our chosen door supplier. So far it seems very variable and we have had some problems with both damages that required repairs and poor quality boards. A great shame as the joinery seemed initially very good. The picture shows the huge variation in grain with the door on the right being the sort one would expect (we like that door) and the doors on the left showing “pine like” open grain and stains (3 horizontal stains on one board, second board in, on the far left door). Pretty disappointing but we shall keep you posted on how the company reacts and do a full and fair review once the company has had a chance to respond.

  

Tiling

Well i finally got down and dirty with the tiles and adhesive, but not before I put down the Durabase CI mat to decouple the tiles from the screed. I wanted to make sure any shrinkage was covered. Its interesting stuff, a kind of rigid waffle that is cut and then stuck to the floor. Allegedly it allows screed floors that aren't fully dry to dry out buy not trapping the moisture, giving a route to pressure adjust and balance.

Well it was cut and stuck, the indentations filled, more adhesive and the tiles laid over. Time will tell if it does its job and if on e still gets as  solid a base. It did add a stage but probably not more than an hour and an extra 30% adhesive.

I also used the LASH tile levelling system. This was the cheapest of the systems and didn't require any tools. As far as i can see the only shortfall of this is the lack of an edge clip which means that there is no additional support to the base on edges and potentially your tiles could run slightly in that direction. In  terms of ease of use though, 10/10.

Meanwhile John is busy on the walls, doors (Eclisse pocket sliders are always a bit tricky when you haven't done one for a while, and the instructions are some of the worst on the market!), and leaks – yes we have one mystery leak on an exposed elevation that is keeping one wall VERY wet. The hunt continues. The new oak doors came too and we will do a post on those separately.

The Apprentices are on the first lime skim coat downstairs and its all starting to look a bit closer to being a habitable room.

Pics to follow soon.

Wonder wall

Our “wonderwall”… from the great father and son team of Dan and Jim Hurles from Kilkhampton. I will get some better photos of this as soon as it’s all finished and tidied. It was a pleasure working with them, no hassles,  just a good job efficiently an d beautifully done.

We asked them top use a more traditional and chunky style to mix in with the front wall. We also chose a herringbone top course to improve stability and resistance to slip. We have found that flat top courses tended to become unsettled with both children and dogs leading to the top course falling off. The herringbone should reduce the likelihood of this.

 

 

If you need any stone walling done we wouldn’t hesitate to recommend them, call Danny on 07900910082