Showing posts with label damp. Show all posts
Showing posts with label damp. Show all posts

Monday, 1 October 2012

The uncomfortable truth

A lot of old buildings, even those given a clean bill of health by a “surveyor” can have horrors in store. I this case no foundations and floor levels excavated under the stone standings were not picked up by a local well respected one.

Whenever we uncover a sight like this one can’t help being filled with a bit of dread. Usually though there is a cost effective, structurally sound, naturally insulated breathable solution if you can think out of the box a bit, (and sometimes there has to be a little concrete in the mix).

We will do some diagrams/cross-sections of our solutions at a later date… until then here’s a bit of an idea.

P1160800 P1160807 P1160821 P1160826

See here is Kieran on work trial, getting nicely stuck in.

Saturday, 17 March 2012

Slice of Lime

Yesterday John and I spent the day at a CPD course with Mike Wye Associates learning all about the applications and benefits of lime technologies. It was a really good day and I would recommend it to anyone who wants an introduction to this natural alternative to renovating. We talked a lot about the issues of damp and in particular about our project.

P1060792 

P1060789 P1060794

The hardest thing is that there is no “right” answer so we now have to marry some new ideas with those of our architects, Squirrel Design, and try and find the best course of action for our property. We have a very complicated set of issues around the back of the barn, with rising damp, structural support,  cob/block/stone mix walls, earth banked up against the side, no drainage in a high weather exposure area and orientation… we will find THE solution… it’s ultimately what we do: analyse the problem, seek the experts opinions, develop a consensus, implement, monitor and adapt if required. It certainly requires more use of the grey matter than new builds, but if we are to keep our architectural heritage it is essential.

In the near future we will post some cross sections of our solution to this particular problem… just in case anyone ever comes across the same situation!