Showing posts with label oak. Show all posts
Showing posts with label oak. Show all posts

Thursday, 4 July 2013

Oak post

We needed an oak post to make the corner window something special, so i went to Winkleigh Timber and after a scrabble around the yard found the following…

With a bit of sanding and oiling it has made the corner a beautifully organic addition to the eco-extension.

P1090223P1090221 P1090217 P1090213 

20130626_103324

Thursday, 18 April 2013

UK Oak Doors

Well we finally got things sorted on the oak door front. I am pleased to say that UK Oak Doors replaced the dodgy door with a glazed version for another room and included some Treatex Hardwax oil for our inconvenience.

So how do we like the doors. We everyone comments on them. Whilst the oak isn’t the most characterful and the grain is a little looser than we would like the build quality and detailing is excellent, particularly the diamond oak screw plugs.

In terms of value for money and construction they are hard to beat. Realistically the only way we could have got a better door would have been by spending a lot more money or making them ourselves from handpicked European Oak.  In terms of pricing, bulk and trade discounts were not available which does make it difficult for resellers/builders but the prices are competitive and i think geared primarily to the consumer. The best bet seemed to be to keep an eye on the website and take advantage of whatever monthly promotions were available.

The important thing is choosing the right door. For open out doors choose the Oak 3 ledge Barn Door as the hinges can go on the un-ledged bead & butt face, and this looks the best. If the hinges are going on the inside on the ledges then you need to order the Oak  Ledge with Optional brace door as the ledges go all the way to the edge of the door and the hinges look “right” that way, (which they don’t on the cottage Door).

The value latch sets are pretty but they aren’t waxed so be prepared for a little bit of wirewool and wax to finish them off and make them more tactile. Again its a value for money product and with a little finishing you can add the extra “je ne sais quoi”.

There is a lot more i could write but it’s late so i think to sum up when i consider all the factors we would happily use UK Oak Doors again. Thanks to Vicky for her efforts in resolving all the issues that arose.

P1080956 P1170877 20130301_102647 P1080725

Wednesday, 18 July 2012

JJF – R.I.P.

Today and far away, whilst this joint was being lovingly crafted by John, there was a change in the order of things, an exchange of energy, a release. I know he would have been proud - Rest in Peace John Joseph. 

P1160314 P1160320

Tuesday, 17 July 2012

Monday, 18 June 2012

Got wood

Well for the last week we have been playing with our wood from Traditional Oak

P1070190Neil, founder/owner of Traditional Oak, delivered the oak in person, bright and early on the Monday with a trailer on the back of his Discovery. After all the time with the wet trades of lime mortars and concrete bases it was great to see something with grain. Before Neil had even finished the porridge Vicky made him,  John and Ian (our new apprentice) had started unloading, and the enthusiasm hasn’t waned since.

There is something special working with such beautiful wood… the smell, the textures, and of course the promise of the finished traditional ceiling.

P1070243Traditional Oak were great at every stage of the order and we are now going to use them for much more, including oak farmhouse doors, facias, and possibly even for the timber frame for the extension.

Of course there are always learning points – these are ours…

  • Specify your tolerance on sizing. Sounds obvious but we forgot and a variance of +/- 10mm between beams means that every pad had to be individually levelled rather than running to a standard around the room. If you want to get pads in before hand then you need to specify +/- 2mm or your floor just wont be level enough.
  • Moisture levels. Our oak is great, looks lovely, BUT it seems a bit moist… we would recommend agreeing a moisture level.
  • Sanded finish: if you go for a sanded finish then agree the standard of that too… ours was fine but it was not to a level where we could not bother sanding it further… make sure you have a heavy weight sander ready for tidying it up… it’s tough stuff so you  are going to have to start really coarse before you can even think about 100+ grits.
  • Routing: good router bits pay dividends and keep going where others overheat and lose their edge. The best ones we found were the diamond tip ones from Axminster Tools

P1070195 P1070209 P1070205 P1070211 P1070226 P1070228

Saturday, 5 May 2012

The Search for Stable Oak

A few weeks ago we began our search for stable oak that we could use to put in a traditional exposed oak beam and joist floor. We decided that this style would be used in both of the traditional barns, taking our queue from the style in the main  farm house. Sadly that structure is not salvageable due to the huge deflections in the beams, but we felt it was appropriate that we recreate this and both restore and enhance the character of the traditional buildings.

After consulting with our structural engineer, measuring once, twice, thrice, we ended up with an oak cut list for THA and THB oak. With deflection being an issue and stability being of the highest importance we could not risk using green structural oak… and so our search began for the most stable and costs effective oak supply in the UK. I wouldn’t be so arrogant as to believe we actually achieved that, but we are very happy with the result.

After much deliberation and clarifications we chose to go with the father/son team of Neil and Russell Traditional Oak and Timber Company. Not only were the prices competitive but the oak is dried for 5-8 years and delivered within 10-14 days. Having dealt with Russell primarily we finalised things with his father Neil whilst Russell went off on honeymoon. Neil closed the deal with honesty and a friendly supportive service, and whilst the oak is yet to be delivered we all have a strong feeling that this was the right decision and their Normandy oak will become one of the important features of the property.

P1070015